How to Build a Chicken Tractor

Why is it called a chicken tractor? I’ll tell you why  - A chicken tractor is kind of like a  tractor in that it’s a movable structure that’s easily moved around in your garden allowing you to choose which areas of the garden need fertilizing and/or cleaning up. A chicken tractor works similarly to an electric tractor is that it goes where work needs to be done.

Chickens are awesome at cultivating soil with their sharp-clawed feet and while they’re at it, they are also feasting on everything green and catching bugs and leaving deposits of their nitrogen-rich manure. The digging and scratching action will incorporate rich manure into the soil, making the soil perfect for plant growing.

The most light weight and efficient chicken tractor is made from a wood frame with chicken wire around the sides and the top to allow for freedom of movement and fresh air to come in. Never put mesh wire on the bottom of the tractor because the chickens need unobstructed access to the soil. I always suggest adding doors for easy access to feeding as well as moving the chickens in and out. You will see that I have added a tarp to the top of the tractor which will provide shade.   In the video, I show you how to make my version of a chicken tractor that fits into a raised bed.  I house my chickens on the raised bed once all of the vegetables have been harvested for the year.  They live on the raised bed for about 1 month then I move them to another raised bed in my garden.  The raised bed that the chickens were in is allowed to lay fallow for 3 months then it’s ready for planting.   
All you’ll need to build my style chicken tractor is lumber, 19 gauge Hardware cloth, screws, washers, a tarp, a hand saw or chop saw and a screw gun! 

Getting Started: The Basics

You can do this! Building your own raised bed is a somewhat ambitious project, but it is very doable and if I can do it, anyone can! Spend the next 20 minutes with me and I will show you step-by-step how to build a chicken tractor from scratch (pardon the pun). You can build your own lightweight tractor so that one person, like you, can easily move it around the garden.

The lumber that I use is 2x3 untreated pine wood.  Pre-drilling holes before you begin to assemble the cage helps to prevent the wood from splitting and makes screwing the wood together easier. I recommend that you start to assemble the back of the cage first. You would use the same type of screws that you used building your raised bed. In addition to the 2X3 pieces of wood, you will also need some strapping pieces which are very thin pieces, that you will see, provide the “seams” of structure. Once you have established the overall shape and dimensions for the tractor you could start to assemble the doors and just set them aside.  Watch me.

You know the saying, “measure twice and cut once.” So make sure your measurements are correct!

Framing and Making the Doors

Next in this video I explain the importance of having two doors in your structure for easier access to feeding.


Well my chicken tractor is almost done. Once the framing is complete, all that’s left to do is “skin” it with the 19 gauge wire which is 2’ wide. The wire is also known as hardware cloth. You’ll see me run into a little glitch with my strapping – one of the pieces is slightly warped, but I can improve on that once I nail it in.

When your framing is complete, it’s time to put your wire on the frame
Just be aware that strapping is sold in bundles and it is hard to see if one or two of them are slightly warped, but it’s not the end of the world. 

Skinning it

Now you see me wrapping the wire around the entire frame of my chicken tractor. The wire that is buckling at the doorway will be cut later, so the door will also be perfect! Next I prep the roof for the wire with a simple hammer and nails.

Tarping it!

We are in the home stretch! After I attach the wire to the roof I remove the excess wire with my wire-cutters. Then I secure the roof by placing an 8’X6’ tarp on top of it. I secure the tarp by adding another layer of strapping to it, which will “sandwich” in the tarp to make it super secure.  The tarp is a little larger than the structure and if you want you can trim it to make it fit perfectly. 

Closing the DOORS on this project!

“4 pieces of wood – make a box and that’s it!”

Which is really all you have to do to make the two doors that I suggest for your chicken tractor; one in the front and one near the back. Once you have put these four pieces of wood together (the box), you will just need to add the wire which is the same process you have been using all along. The last step is adding hinges to the doors which will make them work better as doors. Once you have put them in their perfectly measured space – this baby is done and ready for chickens!

Let’s go outside…

Once outside, the chicken tractor looks great and ready to do what it’s supposed to do. Here are some more tips so you can make your own chicken tractor.

If you have any more questions on this topic visit my message board on this topic.  Register for the forums to ask questions.